ETA 22/0270 - Macsim SC-PROThe Macsim SC-PRO is an anchor made of carbon steel.
|
|
ETA 18/0020 - Vesta VTC-3 Seismic Vesta VTC-3 HDG Seismic Vesta VTC-3X Seismic Vesta VTC-3 A4The Vesta VTC-3 Seismic wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel. The Vesta VTC-3 HDG wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of sherardized steel. The Vesta VTC-3X Seismic wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of galvanized steel.
|
|
ETA 23/0226 - ViaTherm LD 65 Agglo 2Is a thermoplastic for road marking applied by extrusion, as structured longitudinal long-dot
|
|
ETA 23/0630 - Bremick Concrete Screw AnchorsIs a type of anchor made of carbon steel and stainless steel (bimetal).
|
|
ETA 15/0905 - AnchorMark AMDEX concrete screwThe AnchorMark AMDEX concrete screw is an anchor made of carbon steel.
|
|
ETA 14/0374 - SISSY STUDis a concrete screw of sizes 7.5, 10.5, 12.5 and 16.5 for use in cracked and non-cracked concrete. It is made of carbon steel.
|
|
ETA 23/0438 - Sistema Sika Coteterm® Ceramic (Sistema Sikatherm® Ceramic)Is defined as “bonded system with supplementary mechanical fixings” with is used with EPS / XPS panel.
|
|
ETA 23/0204 - LUSOPAINT–mIs a thermoplastic for road marking applied by screed / manually with drop-on glass beads.
|
|
ETA 23/0225 - ViaTherm FL2 Type IIIs a thermoplastic for road marking applied by spray with drop-on glass beads.
|
|
ETA 23/0205 - LUSOPAINTIs a thermoplastic for road marking applied by spray with drop-on glass beads.
|
|
ETA 22/0044 - BRITELINE S31Is a thermoplastic for road marking applied by spray with drop-on glass beads.
|
|
ETA 23/0440 - Novipro Expander EXBE-X7 Novipro Expander EXBE-A27 Novipro Expander EXBE-A47 Novipro Expander EXBE-G7The Novipro Expander EXBE-G7 in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of carbon steel, zinc-nickel coated.
|
|
ETA 20/1289 - TRSA, TRSAK, N-TRSAThe Index TRSA / TRSA-K, in the range of M6 to M20, is an anchor made of galvanised steel.
|
|
ETA 20/1271 - B-THEThe Bilontec screw anchor the is a fastener made of carbon steel of sizes 6, 8, 10, 12, 14 and 18.
|
|
ETA 23/0130 - T-Plastic MojaveThermoplastic for road marking applied by screed box or extrusion with drop-on glass beads.
|
|
ETA 23/0129 - T-Plastic SierraThermoplastic for road marking applied by screed box or extrusion with drop-on glass beads.
|
|
ETA 22/0215 - ELASTTARThis kit, based on hot applied polymer modified bitumen,
|
|
ETA 20/0902 - Thunderbolt Pro SXTBThe Iccons screw anchor Thunderbolt® PRO SXTB is a fastener made of carbon steel of sizes 6, 8, 10, 12, 14 and 18.
|
|
ETA 23/0326 - MAXELASTIC PURMono component liquid applied roof waterproofing based on polyurethane.
|
|
ETA 23/0297 - BSUA, BSUAKIs an anchor made of galvanised steel.
|
|
ETA 23/0291 - BSUA, BSUAK, BSUAS, BSUAR, BSUAK4Anchor made of galvanised steel.
|
|
ETA 23/0288 - BLPT, BLPC, BLPEIs an anchor made of galvanised steel.
|
|
ETA 18/1108 - Anclaje SLPT, anclaje SLPCTorque controlled expansion anchor made of galvanized steel of sizes M6, M8, M10, M12, M16 and M20 for use in concrete.
|
|
ETA 14/0010 - Alucoil® Suspended Cassettes. Alucoil® Riveted BoardsThe evaluated exterior cladding kits, commercially named “ALUCOIL® Riveted Boards” and “ALUCOIL® Suspended Cassettes”, are mainly and respectively composed of riveted plates and hanging trays, coming from the following types of Larson thin and metallic composite panels ®.
|
|
ETA 20/0046 - Screw anchor THEThe concrete screw is a fixing made of carbon steel in sizes 6, 8, 10, 12, 14 and 18.
|
|
ETA 22/0108 - ALSAN 520® / CAMPOLIN NEOIs a liquid applied roof waterproofing.
|
|
ETA 07/0131 - POLIBREAL®The liquid applied roof waterproofing kit is based on hot applied polymer modified bitumen.
|
|
ETA 22/0197 - larcore® A2Panel made of aluminium sheets and honeycomb core .
|
|
ETA 23/0112 - Goujon Techpro FGA acier zingué / A2 / A4Is an anchor made of galvanised steel.
|
|
ETA 23/0121 - EJOT Ceiling Nail E-CNIs an anchor made of galvanized steel.
|
|
ETA 22/0220 - Sistema de aislamiento térmico por el exterior TECTOR NATURTHERMExternal Thermal Insulation Composite System with rendering for use as external insulation of building walls.
|
|
ETA 23/0092 - SYSTEME D´ETANCHEITE LIQUIDE PRB SOLIs a mono component liquid applied roof waterproofing based on polyurethane.
|
|
ETA 23/0098 - PROTECT FIREThe product is reactive coating in water dispersion formulated for the fire protection of structural steel elements.
|
|
ETa 13/0685 - LUSO EXTRUDEIs a thermoplastic for road marking applied by extrusion with drop-on glass beads.
|
|
ETA 22/0433 - White Ultralux 2022.1Is a thermoplastic for road marking applied by extrusion with drop-on glass beads.
|
|
ETA 13/0730 - Anclaje MAXXFAST PROMAXX Anclaje MAXXFAST PROMAXX-GThe Fabory MAXXFAST PROMAXX-G anchor is an anchor made of sherardized steel. |
|
ETA 22/0912 - EJOT J+ / JS+ / JSR+ / JE+ / JSE+Is an anchor made of galvanised steel.
|
|
ETA 22/0913 - EJOT J+ / JS+Anchor made of galvanised steel, which is placed into a drilled hole and anchored by deformation-controlled expansion.
|
|
ETA 07/0054 - Sistema TRADITERMThe TRADITERM System is an external thermal insulation system with plaster for building walls.
|
|
ETA 23/0002 - AT IMPER STEP VISCOConsists of a polyurethane resins.
|
|
ETA 22/0366 - Sistema de aislamiento térmico por el exterior SISTEMA FERRO-TERM SISTEMA CHEM-TERMExternal Thermal Insulation Composite System with rendering for use as external insulation of building walls.
|
|
ETA 22/0163 - SATECORIs defined as “mechanically fixed ETICS” and “mechanically fixed ETICS with supplementary adhesive” with is used with EPS / XPS panel.
|
|
ETA 22/0344 - Transflex TR50 a Transflex TR180Transflex TR50 to Transflex TR180 (Transflex TR hereinafter) mat expansion joints for road bridges are made of a prefabricated elastomeric mat based on a vulcanized elastomer.
|
|
ETA 22/0803 - BTP, BTP-G, BTP-X, BTP-A4The Ninbgo Bigood BTP wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.
|
|
ETA 22/0862 - AQUAPRO® PY H 01is a two components liquid applied roof waterproofing based on applied hybrid polyurea, consists of a hybrid polyurea resins, two components, elastomeric without reinforcing internal layer.
|
|
ETA 22/0141 - TOR SATEIs defined as “bonded system with supplementary mechanical fixings” with is used with EPS-XPS panel.
|
|
ETA 22/0432 - White Eurolux 2022.2Is a thermoplastic for road marking applied by extrusion with drop-on glass beads.
|
|
ETA 22/0786 - POLIUREXIs a one component liquid applied roof waterproofing based on pure polyurethane, consists of a polyurethane resins.
|
|
ETA 10/0231 - TERMOK8® MINERALE L.V.External Thermal Insulation Composite System with rendering for use as external insulation of building walls.
|
|
ETA14/0094 - MACY-THERMIs defined as “bonded system with supplementary mechanical fixings” with is used with EPS-XPS panel, and “mechanically fixed ETICS with supplementary adhesive.
|
|
ETA 21/0460 - Sistema RHONATHERM ORGANICIs defined as “bonded system with supplementary mechanical fixings” with is used with EPS-XPS panel.
|
|
ETA 18/1064 - Anclaje Essve EUSConcrete screw for use in cracked and non cracked concrete. |
|
ETA 22/0451 - Bolt anchor ECB-FZ-A4, ECB-C3-A4, ECD.FZ-C3, ECB-A4Is an anchor made of galvanised steel.
|
|
ETA 22/0629 - WDI2, WDI2L, WDI2 SSt, WDI2L SSt, WD2IRIs an anchor made of galvanised steel.
|
|
ETA 22/0630 - WDI2, WDI2Lis an anchor made of galvanised steel, which is placed into a drilled hole and anchored by deformation-controlled expansion.
|
|
ETA 20/0086 - Sistema GEOPET NOISEFREEEsta evaluación técnica europea se aplica a los productos térmicos de fibras de poliéster.
|
|
ETA 16/0807 - SEÑACRIL ESTANDAR 3100SEÑACRIL ESTANDAR 3100 is a paint without pre-mixed glass microspheres and with dropped-oned materials.
|
|
ETA 22/0678 - CAPAPROOF PUIs a one component liquid applied roof waterproofing based on pure polyurethane, consists of a polyurethane resins, mono-component, elastomeric without reinforcing mesh.
|
|
ETA 22/0679 - CAPAPROOF PUA HIs a two components liquid applied roof waterproofing based on applied hybrid polyurea resins, two components, elastomeric .
|
|
ETA 22/0677 - CAPAPROOF PUA PIs a liquid applied roof waterproofing, based on pure polyurea 100%, consists of a pure polyurea resins, bi-component, elastomeric without internal protection layer.
|
|
ETA 10/0121 - DESMOPOLDESMOPUL is a component liquid applied roof waterproofing based on pure polyurethane, manufactured by the company TECNOPOL SISTEMAS S.L. |
|
ETA 12/0151 - Sistema RHONATHERM®It is made up on site from these components. The manufacturer is ultimately responsible for the ETICS RHONATHERM®, which is a bonded system with supplementary mechanical fixings with EPS /XPS panel and mechanically fixed . |
|
ETA 22/0639 - ESSVE EUSIs a fastener made of carbon steel.
|
|
ETA 20/0900 - Thru-Bolt PROThe ICCONS Thru-Bolt™ PRO-G wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of sherardized steel.
|
|
ETA 22/0640 - Owl Universal primer, Lava 20, Lava 20 top coatIs a mono component liquid applied roof waterproofing based on polyurethane, consisting of a polyurethane elastomeric membrane without or with internal mesh; which once polymerized conforms an elastic.
|
|
ETA 22/0356 - BAUMIT SelEtanche systemLiquid waterproofing, based on polyurethane, consisting of an elastic polyurethane membrane with and without internal reinforcing mesh.
|
|
ETA 22/0499 - Anclaje hembra TP DA+, TP DAL+, TP DA-A4+, TP DAS+The Team Pro TP DA+, TP DAL+, TP DAS+, in the range of M6 to M20, is an anchor made of galvanised steel.
|
|
ETA 22/0452 - Anclaje TP-CCA+, TP-CCA-G+, TP-CCA-X+, TP-CCA-A4+The Team Pro TP-CCA+ wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel
|
|
ETA 22/0450 - Anclaje TP NCA+, TP NCA-A2+, TP NCA-A4+El anclaje Team Pro TP NCA+ en medidas M6, M8, M10, M12, M14, M16 y M20 es un anclaje fabricado en acero cincado.
|
|
ETE 22/0449 - Anclaje hembra TP DA+, TP DAL+, TP DA-A4+, TP DAS+Is an anchor made of galvanised steel.
|
|
ETA 12/0397 - Anchor MTP, Anchor MTP-G, Anchor MTP-X, Anchor MTP-A4The anchor is installed in a cylindrical pre-hole and is fixed by controlled torque expansion.
|
|
ETA 20/0411 - SPRAYLINE BD (TP-200)Is a withe thermoplastic with premix glass beads, applied by spray or structured with drop-on material.
|
|
ETA 22/0104 - SIRIUS 200 SCREEDIs a thermoplastic for road marking applied by extrusion with drop-on glass beads.
|
|
ETA 22/0042 - BRITELINE E20Is a thermoplastic for road marking applied by spray with drop-on glass beads.
|
|
ETA 22/0418 - MIRFAK-THERMBonded system with supplementary mechanical fixings.
|
|
ETA 22/0043 - BRITELINE S20Is a thermoplastic for road marking applied by spray with drop-on glass beads.
|
|
ETA 22/0420 - K´SEL SYSTEMIs a one-component liquid waterproofing, based on polyurethane.
|
|
ETA 19/0143 - TERMOPLÁSTICO SPRAY AP6Is a white thermoplastic with premix glass beads, applied by spray with drop-on material.
|
|
ETA 18/0561 - TERMOPLÁSTICO SPRAY T20is a white thermoplastic with premix glass beads, applied by spray with drop-on material. |
|
ETA 22/0105 - SIRIUS 200 SPRAYIs a thermoplastic for road marking applied by spray with drop-on glass beads
|
|
ETA 19/0807 - TERMOPLÁSTICO SPRAY T-30Is a white thermoplastic with premix glass beads, applied by spray with drop-on material.
|
|
ETA 19/0805 - SIRIUS 300 SPRAYIs a white thermoplastic with premix glass beads, applied by spray with drop-on material.
|
|
ETA 19/0804 - SIRIUS 300 SCREEDIs a white thermoplastic with premix glass beads, applied by screed or extrusion with drop-on material. |
|
ETA 22/0407 - AQUAPRO® PY 01Is a liquid applied bridge deck waterproofing kit based on polyurea resin. The waterproof membrane consists of a polyurea resins.
|
|
ETA 22/0406 - QSI MOSTLiquid waterproofing based on polyurea made up of bi-component, elastomeric polyurea resins.
|
|
ETA 22/0380 - MAXELASTIC POLY-HIs a two components liquid applied roof waterproofing based on applied hybrid polyurea, consists of a hybrid polyurea resins.
|
|
ETA 22/0375 - YESAL RESIG (Ignífugo)Is a mortar of fine granule based in calcium sulphate. This product is lightened with expansive minerals and formulated with several additives to improve the application and its performances.
|
|
ETA 22/0399 - INESFIRE AQUAReactive paints for fire protection of steel elements.
|
|
ETA 21/0473 - Sikalastic® 851 R + Sikalastic® 701Is a two-component, elastic, crack-bridging, two-component, hot-spray-applied, modified polyurethane/polyurea hybrid membrane without internal reinforcing mesh.
|
|
ETA 22/0357 - PENECOATTM ELASTIC SYSTEMLiquid waterproofing, based on polyurethane, consisting of an elastic polyurethane membrane with and without internal reinforcing mesh.
. |
|
ETA 20/0848 - INY-ALVIPREINY-ALVIPRE is a filling grout (as defined in EN 447) used as filling material for post-tensioning kits in accordance to EAD 160027-00-0301.
|
|
ETA 13/0626 - NATURCLAD-WNATURCLAD-W kits, for ventilated external wall claddings, are composed by high-pressure decorative laminates (Standard and Fire-Retardant grade) for exterior application produced by PARKLEX PRODEMA INT. S.L.U., NATURCLAD-W panels are mechanically fixed to timber or aluminum subframe.
|
|
ETA17/0687 - Anclaje de techo ANCUIs an anchor made galvanized steel. The anchor is installed into a predrilled cylindrical hole and anchored by deformation-controlled expansion.
|
|
ETA 22/0101 - Anclaje de techo Novipro KS-XThe Novipro ceiling anchor KS-X in diameter 6 is an anchor made of galvanized steel.
|
|
ETA 22/0269 - GETO PLUS CE1 SMKThe GETO PLUS CE1 SMK is an anchor made of carbon steel.
|
|
ETA 22/0268 - GETO PLUS CE1 SMKThe anchor GETO PLUS CE1 SMK is a fastener made of carbon steel of sizes 7.5, 10.5, 12.5 and 16.5.
|
|
ETA 21/0890 - GRAPAMAR PF 1025Los kits de subestructura y fijaciones – GRAPAMAR PF 1025 – previstos para revestimientos en piedra natural de fachada ventilada o no ventilada, están constituidos por perfilería de aluminio de la empresa ANCLAJES GRAPAMAR S.L.
|
|
ETA 22/0178 - BOLTHERMThe reflective product BOLTHERM is composed by two external aluminium films.
|
|
ETA 21/0365 - WT1 ST, WT1 SH, WT1, WT1 SSTThe Walraven WT1 ST wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.
|
|
ETA 21/0734 - DESMOPOL SYSTEMDESMOPOL SYSTEM is a liquid applied bridge deck waterproofing kit based on polyurethane resin.
|
|
ETA 22/0069 - IBERTERM SATEThe System is intended to be used as external thermal insulation for building walls.
|
|
ETA 22/0239 - NEOLASTIC SYSTEMThe Liquid Applied Roof Waterproofing Kit (LARWK) “NEOLASTIC SYSTEM” is designed and installed in accordance with the manufacturer design and installation instructions.
|
|
ETA22/0222 - SYSTEME REVÉTANCHE PUThis LARWK comprises the following components and systems, which are produced by the manufacturer.
|
|
ETA 22/0142 - ULF, ULS, ULT, NULSThe ULF wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.
|
|
ETA 07/0002 - Sistema WALL-TERM ®The WALL-TERM® System is intended to be used as external thermal insulation for building walls.
|
|
ETA 19/0284 - Anchor CA-Z/X Anchor CA-H/X Anchor CA-Z/HMetal anchor for use in concrete.
|
|
ETA 07/0003 - Sistema de pretensado TECPRESAPost-tensioning kit for prestressing of structures. |
|
ETA 19/0235 - INNOSPRAY-PXIs a mortar of fine granule based in calcium sulphate.
|
|
ETA 21/1110 - BUILDBOND PE, BUILBOND FRThin metal composite sheet.
|
|
ETA 22/0137 - CP Fire S1001FD Intumescent White, CP Fire S1002 Intumescent WhiteCP Fire S1000FD Intumescent White / CP Fire S1002 Intumescent White is a water-based intumescent reactive coating formulated for fire protection of structural steel elements
|
|
ETA 21/0731 - TERMOPLÁSTICO EXTRUDER BLANCOIs a white thermoplastic with premix glass beads, applied by extrusion with drop-on material.
|
|
ETA 22/0099 - Novipro drop-in anchor SA-XThe Novipro drop-in anchor SA-X in the range of M6 to M16 is an anchor made of galvanised steel.
|
|
ETA 22/0100 - Novipro through bolt EXBE-G Novipro through bolt EXBE-X Novipro through bolt EXBE-A4The Novipro EXBE-G wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of sherardized steel.
|
|
ETA 22/0098 - Anclaje hembra Novipro SA-XThe Novipro drop-in anchor SA-X, in the range of M6 to M16, is an anchor made of galvanised steel.
|
|
ETA 13/0098 - PROMILL IGNIFUGOis a mortar of fine granule based in calcium sulphate. This product is lightened with expansive minerals and formulated with several additives to improve the application and its performances.
|
|
ETA 22/0085 - WEBERDRY AQUA ADVANCED PU SYSTEMIs a mono component liquid applied roof waterproofing water-based polyurethane consisting of a polyurethane elastomeric membrane with reinforcing internal mesh.
|
|
ETA 22/0084 - WEBER DRY PU SYSTEM, WEBER ADVANCED PU SYSTEMIs a mono component liquid applied roof waterproofing based on polyurethane consisting of a polyurethane elastomeric membrane without or with internal mesh
|
|
ETA 20/0121 - VISTAVISTA is a withe acrylic paint used as a surface coating material for signalisation purposes, without premix glass beads, applied by spray with drop-on material.
|
|
ETA 21/0942 - TECNOCOAT P-2049Is a liquid applied bridge deck waterproofing kit based on polyurea resins.
|
|
ETA 11/0358 - Sistema SIKA® THERMOCOATExternal Thermal Insulation Composite System (ETICS) is intended to be used as external thermal insulation for wall construction. |
|
ETA 21/0891 - DLXTM-S drop in anchorThe ICCONS DLXTM-S, in the range of M8 to M12, is an anchor made of zinc plated steel.
|
|
ETA 21/0926 - IC 11-00 INTUMESCENT, IC 11-01 INTUMESCENTThe IC 11-00 INTUMESCENT / IC 11-01 INTUMESCENT product is reactive coating in solvent medium formulated for the fire protection of structural steel elements
|
|
ETA 21/0248 - MARISEAL 250 SYSTEMMARISEAL 250 es un impermeabilizante líquido, basado en poliuretano, fabricado por MARIS POLYMERS, constituido por una membrana elástica de poliuretano con y sin malla de refuerzo interior.
|
|
ETA 21/0249 - MARISEAL 250W SYSTEMMARISEAL 250W is a mono component liquid applied roof waterproofing water-based polyurethane, manufactured by the company MARIS POLYMERS, consisting of a polyurethane elastomeric membrane with reinforcing internal mesh.
|
|
ETA 21/0893 - Mechanical anchor W-HR / W-HR A2The Würth W-HR sleeve anchor in the range of diameters 8, 10, 12, 16 and 20 is an anchor made of galvanised steel.
|
|
ETA 14/0068 - Anclaje hembra Index HEHO, HECLO, HEHC, HEA4, HEC4The Index HEHO, HECLO, HEHC, in the range of M6 to M20, is an anchor made of galvanised steel.
|
|
ETA 21/0917 - PASSIV OUATECOThis European Technical Assessment applies to the factory-made thermal products made of vegetable fibres denominated as: “PASSIV OUATECO”.
|
|
ETA 21/0837 - FLEXISKIN 1440FLEXISKIN 1440 is a liquid applied bridge deck waterproofing kit based on polyurea resin. The waterproof membrane consists of a polyurea resins, bi-component, elastomeric.
|
|
ETA 21/0831 - MWA, MWA A-2, MWA A-4MASON Wedge Anchor MWA in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel.
|
|
ETA 21/0836 - FOSROC POLYUREA WH 500FOSROC POLYUREA WH 500 is a liquid applied bridge deck waterproofing kit based on polyurea resin.
|
|
ETA 21/0740 - IMPERMAX POLYUREA H FLEXIMPERMAX POLYUREA H FLEX is a liquid applied bridge deck waterproofing kit based on polyurea resin, manufactured by the company KRYPTON CHEMICAL, S.L. The waterproof membrane consists of a polyurea resins, bi-component, elastomeric.
|
|
ETA 21/0274 - Signalit Agglomeraat NL11 High IndexSignalit Agglomeraat NL11 High Index is a cold plastic applied as structured (agglomerate), over a layer of a previously sprayed product, with drop-on glass beads.
|
|
ETA 19/0656 - ALBOND SZThe assessed kit for ventilated external wall cladding mechanically fixed named “ALBOND SZ” (family C) is based on thin metallic composite panels “albond®” PE and “albond® FR” which are manufactured by the ETA-holder.
|
|
ETA 19/0655 - ALBOND RBKit for ventilated external wall cladding mechanically fixed .
|
|
ETA 19/0654 - ALBOND SCkit for ventilated external wall cladding mechanically fixed.
|
|
ETA 21/0438 - SATE FACHADASSATE FACHADAS is defined as “bonded system with supplementary mechanical fixings” with is used with EPS panel, and “mechanically fixed ETICS with supplementary adhesive” with is used with MW panel. |
|
ETA 20/1265 - TRESPA® METEON®TRESPA® METEON® y TRESPA® METEON® FR kits, for ventilated external wall claddings, are composed by high-pressure decorative laminates for exterior application produced by TRESPA INTERNATIONAL B.V. HPL panels are mechanically fixed to timber or aluminium subframe.
|
|
ETA 21/0693 - F62 SUPERSPRAYF62 SUPERSPRAY product is a mortar of fine granule based in calcium sulphate. This product is lightened with expanded minerals and others raw materials and formulated with several additives to improve the application and its performances.
|
|
ETA 21/0620 - IDKLAP IDKLAPG IDKLAPXThe Inka IDKLAP wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.
|
|
ETA 21/0617 - Berner Sleeveanchor BCHThe Berner Sleeveanchor BCH in the range of diameters 8, 10, 12, 16 and 20 is an anchor made of galvanised steel.
|
|
ETA 21/0177 - JOKER Concrete Screw Anchor SISSY STUDThe anchor Sissy Stud is a fastener made of carbon steel of sizes 7.5, 10.5, 12.5 and 16.5. The fastener is installed into a predrilled cylindrical drilled hole.
|
|
ETA 17/0073 - SPIT FIX Z XTREM.220The Spit FIX Z XTREM.220 wedge anchor in the range of M12 and M16 is an anchor made of galvanised steel, with length greater than 220 mm.
|
|
ETA 21/0543 - IDKLAH IDKLMI IDKLMIA4The Inka IDKLAH in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel.
|
|
ETA 21/0542 - IDCAHEHO IDCAHECLO IDCAHEHC IDCAHEA4The Inka IDCAHEHO, IDCAHECLO, IDCAHEHC, in the range of M6 to M20, is an anchor made of galvanised steel.
|
|
ETA 21/0541 - IDCAHEHO IDCAHECLOThe Inka IDCAHEHO / IDCAHECLO in the range of M6 to M20 is an anchor made of galvanised steel, which is placed into a drilled hole and anchored by deformation-controlled expansion.
|
|
ETA 14/0135 - Anclaje hembra Index HEHO / HECLOIs an anchor made of galvanised steel, which is placed into a drilled hole and anchored by deformation-controlled expansion.
|
|
ETA 20/0976 - EMMEDUE BUILDING SYSTEMEMMEDUE BUILDING SYSTEM comprises a range of panels of a 3-dimensional grid of steel wires and incorporated thermal insulation material and is comprised of panels made of a 3-dimensional grid of two welded fabrics of steel wires.
|
|
ETA 20/0830 - Connettore CentroStorico Calcestruzzo concrete screwThe Connettore CentroStorico Calcestruzzo concrete screw is an anchor made of carbon steel.
|
|
ETA 21/0474 - F62 PAINT SThe F62 PAINTS product is reactive coating in water dispersion formulated for the fire protection of structural steel elements.
|
|
ETA 21/0364 - Outifix DFX, Outifix DFX/A4The Walraven WT1 ST wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.
|
|
ETA 14/0424 - Anclaje TP CCA Anclaje TP CCA-G Anclaje TP CCA-XTeam Pro TP CCA is a torque controlled expansion anchor made of zinc plated steel of the sizes in the range from M8 to M20 and may only be used in cracked or non-cracked concrete subject to dry internal conditions. |
|
ETA 21/0366 - WT7, WT7 SST/A2, WT7 SST/A4The Walraven WT7 in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel.
|
|
ETA 15/0655 - STB-REM, STB -T-REM, STB-CH, STB-T-CH, STB-SZ, STB-T-SZThe assessed kits for ventilated external wall claddings mechanically fixed are “STB-REM”, “STB-T-REM” “STB-CH”, “STB-T-CH”, “STB-SZ” and “STB –T-SZ” and are mainly and respectively composed of riveted plates and suspended cassettes made of three types of thin metallic composite panels denominated “stacbond®”, “stacbond® FR”, and “stacbond® A2.
|
|
ETA 21/0380 - MORCEM COVER POLIUREAMORCEM COVER POLIUREA is a liquid applied roof waterproofing based on pure polyurea 100 %, consists of a pure polyurea resins, bi-component, elastomeric.
|
|
ETA 21/0061 - SATE BEYEMSATE BEYEM is defined as “bonded system with supplementary mechanical fixings” with is used with EPS panel, and “mechanically fixed ETICS with supplementary adhesive”
|
|
ETA 21/0301 - MORE-FIREMORE-FIRE is a reactive coating in water dispersion, formulated for the fire protection of structural steel elements.
|
|
ETA 21/0176 - Spit Grip+/L, Spit Grip+/A4The Spit Grip+/L in the range of M6 to M16, is an anchor made of galvanised steel.
|
|
ETA 19/0808 - VELUFLEX HERMES 18CVELUFLEX HERMES 18C is a thermoplastic used as a surface coating material for signalisation purposes, with premix glass beads, hot applied with drop-on material
|
|
ETA 21/0063 - TGDIA, TGDIAF, TGDIASSThe Tembo TGDIA / TGDIAF, in the range of M6 to M20, is an anchor made of galvanised steel.
|
|
ETA 16/0668 - Statheros TRX, TRX-A2, TRX-A4The Statheros TRX in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel.
|
|
ETA 20/1288 - TRSA, TRSAK, N-TRSAThe Thale TRSA / TRSA-K in the range of M6 to M20 is an anchor made of galvanised steel.
|
|
ETA 07/0228 - AQUALINE 192 B (AQ-0300)AQUALINE 192 B (AQ-0300) is a white water-based white paint without premix glass microspheres that requires the use of dropped-on materials to be used on roads exposed to traffic.
|
|
ETA 20/0901 - Thunderbolt Pro SXTBThe Iccons screw anchor Thunderbolt® Pro SXTB is a fastener made of carbon steel of sizes 5 and 6. |
|
ETA 21/0230 - MAXELASTIC POLY-MMAXELASTIC POLY-M is a two components liquid applied roof waterproofing based on cold applied polyurea, consists of a cold applied polyurea resins, two components, elastomeric.
|
|
ETA 20/0809 - KHA-G/KHAThe Kalz KHA-G / KHA in the range of M6 to M20 is an anchor made of galvanised steel, which is placed into a drilled hole and anchored by deformation-controlled expansion. |
|
ETA 14/0145 - etalbond® PE/FR Riveted Boards etalbond® PE/FR Suspended CassettesThe kits for external wall claddings “etalbond® PE/FR Riveted Boards” and “etalbond® PE/FR Suspended Cassettes” are made of the following types of thin and metallic composite panel (TCMP).
|
|
ETA 20/1276 - B-MTP, B-MTP-G, B-MTP-XThe Bilontec B-MTP wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.
|
|
ETA 20/1275 - B-MTH, B-MTH-A2, B-MTH-A4The Bilontec B-MTH in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel.
|
|
ETA 20/1274 - B-CH/B-CH-A2The Bilontec B-CH sleeve anchor in the range of diameters 8, 10, 12, 16 and 20 is an anchor made of galvanised steel.
|
|
ETA 20/1273 - B-HEHO/B-HECLOThe Bilontec B-HEHO / B-HECLO in the range of M6 to M20 is an anchor made of galvanised steel.
|
|
ETA 20/1272 - B-SLPT/B-SLPCThe Bilontec B-SLPT heavy duty anchor in the range of M6, M8, M10, M12, M16 and M20 is an anchor made of galvanised steel.
|
|
ETA 20/1270 - B-HCThe Bilontec B-HC anchors are made of a metal sleeve and a metal expansion cone.
|
|
ETA 20/1268 - B-THEThe Bilontec screw anchor the is a fastener made of carbon steel of sizes 6, 8, 10, 12, 14 and 18.
|
|
ETA 20/1267 - B-ANCUThe Bilontec ceiling anchor B-ANCU in diameter 6 is an anchor made of galvanized steel.
|
|
ETA 20/1266 - B-HEHO/B-HECLO/B-HEA4The Bilontec B-HEHO / B-HECLO, in the range of M6 to M20, is an anchor made of galvanised steel.
|
|
ETA 20/0894 - PERLIFOC HP Eco+PERLIFOC HP Eco+ is a mortar of fine granule based in calcium sulphate.
|
|
ETA 20/0494 - Tornillo hormigón THEScrew anchor of size 6 for use in concrete for redundant non-structural systems.
|
|
ETA 20/0831 - CEM-E concrete screwThe CEM-E concrete screw is an anchor made of carbon steel. The anchor is made in sizes 7.5, 10.5, 12.5 and 16.5, and s screwed into a predrilled cylindrical drill hole.
|
|
ETA 20/0904 - TGTBA, TGTBASS, TGTBAZSThe Tembo TGTBA wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.
|
|
ETA 20/0807 - KWA, KBA-A2, KBA-A4The Kalz KWA in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel.
|
|
ETA 20/0903 - TGDIA, TGDIAFThe Tembo TGDIA / TGDIAF in the range of M6 to M20 is an anchor made of galvanised steel,
|
|
ETA 20/0253 - TECNOCOAT CP-2049 PLUS SYSTEMTECNOCOAT CP-2049 PLUS SYSTEM is a two components liquid applied roof waterproofing based on cold applied polyurea, manufactured by the company TECNOPOL SISTEMAS S.L.U.
|
|
ETA 20/0808 - BSTB7 , BSTB7A2, BSTB7RIs an anchor made of galvanised steel.
|
|
ETA 16/0432 - BAUPANEL SYSTEMBAUPANEL SYSTEM is a panel of a 3-dimensional grid of steel wires and incorporated thermal insulation material and is comprised of panels made of a 3-dimensional grid of two welded fabrics of steel wires.
|
|
ETA 07/0233 - PLASTIVIAL B (DCM-0404)Is a two-component cold plastic without premix glass microspheres that does not require the use of dropped-on materials to be used on roads exposed to traffic.
|
|
ETA 20/0821 - BSTB1ZS, BSTB1S, BSTB1The Bright Star BSTB1ZS wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.
|
|
ETA 20/0818 - SISTEMA ECO-WÜTERMIC®SISTEMA ECO-WÜTERMIC® is a product, which it consisted by mats made of cotton fibres, is intended to be used within buildings for insulation of walls, ceilings, floors, roofs, between rafters and timber work.
|
|
ETA 14/0467 - TNUX-n frame anchorAnclaje para marcos TNUX-n es un anclaje plástico de diámetro 8 y 10 para fijaciones múltiples en hormigón y mampostería en aplicaciones no estructurales. |
|
ETA 07/0229 - RAISELINE (TP-505)Is a white thermoplastic with premix glass microspheres and dropped-on materials.
|
|
ETA 07/0232 - VIALINE AC-2 BLANCA (AC-0100)VIALINE AC-2 BLANCA (AC-0100) is a white acrylic paint without premix glass microspheres that requires the use of dropped-on materials to be used on roads exposed to traffic.
|
|
ETA 11/0023 - DOSCRIL 5115Is a cold plastic for horizontal road marking that is used as a surface coating material for signalization purposes when it is applied on the road with or without premix and/or dropped-on materials.
|
|
ETA 20/0651 - PINTURA ACRÍLICA AL AGUAPINTURA ACRÍLICA AL AGUA is a paint without premix glass beads, applied by spray with drop-on material.
|
|
ETA 20/0319 - GRESPANIAThe GRESPANIA kit for ventilated external wall claddings mechanically fixed in ventilated façades consists of ceramic tiles fastened to the aluminium subframe by hidden punctual fixings. This kit is classified as family C, according to the EAD 090062-00-0404: “Kit for external wall claddings mechanically fixed”.
|
|
ETA 20/0661 - CHEMIDROP PUCHEMIDROP PU is a one component liquid applied roof waterproofing based on pure polyurethane, consists of a polyurethane resin, mono-component, elastomeric.
|
|
ETA 20/0632 - Parabolt V2x2xx, Parabolt V2x3xx, Parabolt V2x4xxThe Fixe V2x2xx in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel.
|
|
ETA 14/0068 - Anclaje hembra Index HEHO / HECLO / HEA4The Index HEHO / HECLO in the range of M6 to M20 is an anchor made of galvanised steel. The Index HEA4 in the range of M6 to M20 is an anchor made of stainless steel.
|
|
ETA 18/0560 - 5117 – DOSCRIL ESTÁNDAR BLANCOIs a road marking cold plastic used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials.
|
|
ETA 18/0559 - 2001 – ECOPICRIL ESTÁNDAR BLANCOIs a road marking paint used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials.
|
|
ETA 10/0443 - CITYCRIL D WHITE 3129Is a road marking paint used as a surface coating material for signalization purposes when it is applied on the road with or without dropped-on materials.
|
|
ETA 16/0806 - TWINCRIL 6100B/6001AIs a cold plastic for horizontal road marking without premixed glass microspheres and with dropped-on aggregates.
|
|
ETA 16/0505 - Würth Fixanchor W-F/S Würth Fixanchor W-F/A4Torque controlled expansion anchor made of galvanised steel or stainless steel of sizes M6, M8, M10, M12, M14, M16 and M20 for use in non-cracked concrete.
|
|
ETA 20/0481 - Hobson Clawbolt expansion anchor EAW70Are anchors made of stainless steel of grades A2 and A4 respectively.
|
|
ETA 18/0672 - PERLIFOC HPPERLIFOC HP is a mortar of fine granule based in calcium sulphate. This product is lightened with expanded minerals and others raw materials and formulated with several additives to improve the application and its performances.
|
|
ETA 20/0428 - Anclaje hembra EA / EA KDeformation controlled anchor made of galvanized steel of sizes M6, M8, M10, M12, M16 and M20 for multiple use for non-structural applications in concrete.
|
|
ETA 20/0433 - Anclaje hembra EA / EA KDeformation controlled anchor made of galvanized steel of sizes M6, M8, M10, M12, M16 and M20 for use in non-cracked concrete.
|
|
ETA 20/0439 - SISTEMA MORCEM COVERSISTEMA MORCEM COVER is a one component liquid applied roof waterproofing based on pure polyurethane, consists of a polyurethane resin, mono-component, elastomeric.
|
|
ETA 18/0674 - 6117B/6117A – TWINCRIL ESTÁNDAR BLANCO Is a cold plastic without premix glass, applied by spray with drop-on material.
|
|
ETA 20/0116 - MI anchor Zinc, MI anchor A2, MI anchor A4 Is an anchor made of galvanised steel. The Mivrag MI-A2 and MI-A4 in the range of M6, M8, M10, M12, M16 and M20 are anchors made of stainless steel of grades A2 and A4 respectively.
|
|
ETA 20/0160 - CINGARD® EP500CINGARD® EP500 is a liquid applied roof waterproofing membrane based on a resin of polyurea, manufactured by the company CIN, S.A.
|
|
ETA 20/0266 - OKAPUR FLEXOKAPUR FLEX is a one component liquid applied roof waterproofing based on pure polyurethane, consists of a polyurethane resin, mono-component, elastomeric.
|
|
ETA 17/0144 - ACRUXACRUX is a white acrylic waterborned paint without premix glass beads, applied by spray with drop-on material.
|
|
ETA 16/0760 - Sistema TRADITERM FLEXIBLEExternal Thermal Insulation Composite System with rendering for use on building walls. |
|
ETA 18/0550 - F-2001 Termospray blanco básico 20 %Is a road marking thermoplastic used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials.
|
|
ETA 19/0649 - F-1009 Pintura acrílica blanca especialIs a white solvent based paint without premix glass, applied by spray with or without drop-on material. |
|
ETA 17/0318 - SilbonitThe “Silbonit” kits, for ventilated external wall claddings, are composed by fibre-cement flat sheets produced by Societá Italiana Lastre, S.p.A. The flat sheets are mechanically fixed, by screw or rivets, to a subframe of wood, galvanized steel or aluminium. |
|
ETA 18/0367 - Trespa Pura NFC®The “Trespa Pura NFC®- Flush siding” and “Trespa Pura NFC® - Lap siding” kits, for ventilated external wall claddings, are composed by sidings of high-pressure decorative laminates fire-resistant for exterior application. |
|
ETA13/1012 - Anclaje TECFI ZJE01 / ZJE31 Anclaje TECFI ZJE51 / ZJE61 Anclaje TECFI ZJE71 / ZJE81Torque controlled expansion anchor made of galvanised steel or stainless steel of sizes M6, M8, M10, M12, M14, M16 and M20 for use in non-cracked concrete.
|
|
ETA 16/0008 - ECOPICRIL 2100Is a white water based paint without premix glass, applied by spray with drop-on material. |
|
ETA 10/0442 - SEÑACRIL 3105 CEIs a white solvent based paint without premix glass, applied by spray with drop-on material. |
|
ETA 18/1082 - QUESTOL®QUESTOL® is a liquid applied roof waterproofing membrane based on a resin of polyurea, manufactured by the company PLASFI, S.A.
|
|
ETA 19/0737 - DURLAY TECHTOPDURLAY TECHTOP is a liquid applied roof waterproofing based on pure polyurea 100 %, consists of a pure polyurea resins, bi-component, elastomeric, without internal protection layer
|
|
ETA 19/0669 - Anchor EAW Anchor EAW-GD Anchor EAW-ZDThe Hobson EAW wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel. The Hobson EAW-GD wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of sherardized steel.
|
|
ETA 19/0673 - EDI / EDL Drop in anchorThe Index EDI/EDL in the range of M6 to M20 is an anchor made of galvanised steel, which is placed into a drilled hole and anchored by deformation-controlled expansion.
|
|
ETA 19/0637 - FLEXISKIN 1440 PUREFLEXISKIN 1440 PURE is a liquid applied roof waterproofing membrane based on a pure resin of polyurea, consists of a pure polyurea resins, bi-component, elastomeric, without internal protection layer.
|
|
ETA 19/0636 - SIKALASTIC-833RSIKALASTIC-833R is a liquid applied roof waterproofing membrane based on a pure resin of polyurea, consists of a pure polyurea resins, bi-component, elastomeric, without internal protection layer.
|
|
ETA 19/0635 - SIKALASTIC-852RSIKALASTIC-852R is a liquid applied roof waterproofing based on pure polyurethane, consists of a polyurethane resins, bi-component, elastomeric, without internal protection layer.
|
|
ETA 19/0634 - SIKALASTIC-709SIKALASTIC-709 is a liquid applied roof waterproofing based on polyurea, consists of a polyurethane-polyurea resins, bi-component, elastomeric, with or without internal protection layer.
|
|
ETA 19/0703 - Hobson drop in anchor EDI/EDLThe Index EDI/EDL in the range of M6 to M20 is an anchor made of galvanised steel, which is placed into a drilled hole and anchored by deformation-controlled expansion
|
|
ETA 19/0621 - Hobson XBolt concrete screw anchor EXHMSR15MConcrete screw of sizes 7.5, 10.5, 12.5 and 16.5 for use in cracked and non-cracked concrete.
|
|
ETA 19/0069 VIALINE AC-2 B RF (AC-0103)Is a paint without premix glass beads, applied by spray with drop-on material. |
|
ETA 19/0455 - Anclaje JRSConcrete screw of sizes 7.5, 10.5, 12.5 and 16.5 for use in cracked and non-cracked concrete.
|
|
ETA 19/0351 - Hobson splice anchor EHWMSZSAnchor made of galvanized steel for multiple use for non-structural applications in concrete.
|
|
ETA 19/0052 - EPSILON “T”The “EPSILON T” kit, composed by subframe and fixings for fastening cladding and external wall elements, is fixed to the external wall of new or existing buildings (retrofit). An insulation layer is usually fixed on the external wall |
|
ETA 19/0340 - Anclaje ADBSConcrete screw of sizes 7.5, 10.5, 12.5 and 16.5 for use in cracked and non-cracked concrete
|
|
ETA 19/0343 - Anclaje CLR 6Concrete screw of sizes 7.5, 10.5, 12.5 and 16.5 for use in cracked and non-cracked concrete.
|
|
ETA 19/0352 - GLOBALFIREIs reactive coating in water dispersion formulated for the fire protection of structural steel elements.
|
|
ETA 19/0315 - AT Imper Step Visco BitAT Imper Step Visco Bit consists of a polyurethane resins, bi-component, elastomeric without reinforcing mesh
|
|
ETA 12/0438 - DE FAST ETA 7 EV DE FAST ETA 7 A2 DE FAST ETA 7 A4Torque controlled expansion anchor made of galvanised steel or stainless steel of sizes M6, M8, M10, M12, M14, M16 and M20 for use in non-cracked concrete. |
|
ETA11/0474 - Anclaje SMART® SMK Anclaje SMART® SMKI2 Anclaje SMART® SMKIThe SMART® SMK anchor is an anchor made of zinced steel. The SMKI anchor is an anchor made of stainless steel.
|
|
ETA 18/1016 - DANOTHERMIs a bonded system with supplementary mechanical fixings with EPS/XPS panel; the minimum number of fasteners per square metres are 6 for EPS/XPS.
|
|
ETA 19/0104 - DP 3000 POLYUREADP 3000 POLYUREA is a liquid applied roof waterproofing membrane based on pure polyurea 100 %, consists of pure polyurea resins, bi-component, elastomeric without internal protection layer
|
|
ETA 18/1065 - Tornillos de anclaje AMBFAST europeIs a concrete screw of sizes 7.5, 10.5, 12.5 and 16.5 for use in cracked and non-cracked concrete.
|
|
ETA 11/0377 - Anclaje NWS-CE Anclaje NWS-CEX2 Anclaje NWS-CEX4Torque controlled expansion anchor made of galvanised steel or stainless steel of sizes M6, M8, M10, M12, M14, M16 and M20 for use in non-cracked concrete.
|
|
ETA 18/0386 - Tirafondos TEX: TEXZT, TEXZP, TEXBT, TEXBP, TECBT, TXABScrews of diameters 6, 8 and 10 are screws made of hardened carbon steel with a corrosion protection and an antifriction coating.
|
|
ETA 18/1043 - TRSO/ TRSOK drop in anchorIs an anchor made of galvanised steel, which is placed into a drilled hole and anchored by deformation-controlled expansion. |
|
ETA 18/0712 - larson® composite panel A2Panel composite de aluminio. |
|
ETA 18/1015 - Sistema PROPAM AISTERM with URSA TERRA SPPROPAM AISTERM with URSA TERRA SP is a system mechanically fixed without supplementary adhesive on MW board.
|
|
ETE 18/1081 - PURTOP EASY SYSTEM ROOFPURTOP EASY SYSTEM ROOF is a one component liquid applied roof waterproofing based on pure polyurethane, consists of a polyurethane resin, mono-component, elastomeric, without reinforcing mesh (only in singular point: evacuations, upstands, …
|
|
ETA 18/0499 - Sistema RHONATHERM® CERAMICIs a bonded system with supplementary mechanical fixings with EPS panel. The minimum number of fasteners per square metres are 6 for EPS.
|
|
ETA 18/0909 - COOL-R BASE COAT 720SCOOL-R BASE COAT 720S is a liquid applied roof waterproofing based on a pure polyurethane, consists of a polyurethane resin, bi-component, elastomeric, without internal protection layer.
|
|
ETA 18/0895 - PURICOAT ARPURICOAT AR is a liquid applied roof waterproofing membrane based on a pure resin of pure polyurea, manufactured by the company PURINOVA Sp.z.o.o.
|
|
ETA 18/0908 - COOL-R BASE COAT 710COOL-R BASE COAT 710/711/712/700T are liquid applied roof waterproofing membrane based on a pure polyurethane.
|
|
ETA 18/0896 - PURICOAT HFPURICOAT HF is a liquid applied bridge deck waterproofing membrane based on polyurea, manufactured by the company PURINOVA Sp.z.o.o.
|
|
ETa 17/0241 - INNOPAINTIs reactive coating in water dispersion formulated for the fire protection of structural steel elements.
|
|
ETA 13/0923 - EQTEC MORTEROIs a mortar of fine granule based in calcium sulphate. This product is lightened with expansive minerals and formulated with several additives to improve the application and its performances.
|
|
ETA15/0204 - Multifix MF-MTH wedge anchor Multifix MF-MTH-A2 wedge anchor Multifix MF-MTH-A4 wedge anchorThe Multifix MF-MTH in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel. The Multifix MF-MTH-A2 and MF-MTH-A4 in the range of M6, M8, M10, M12, M16 and M20 are anchors made of stainless steel of grades A2 and A4 respectively. |
|
ETA 18/0699 - Expansion anchor F-MTH Expansion anchor F-MTH-A2 Expansion anchor F-MTH-A4The Faynot F-MTH in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel. The Faynot F-MTH-A2 and F-MTH-A4 in the range of M6, M8, M10, M12, M16 and M20 are anchors made of stainless steel of grades A2 and A4 respectively. |
|
ETA 11/0103 - Anclaje CLOVERFIX MTH Anclaje CLOVERFIX MTH-A2 Anclaje CLOVERFIX MTH-A4The Cloverfix MTH in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel. The Cloverfix MTH-A2 and MTH-A4 in the range of M6, M8, M10, M12, M16 and M20 are anchors made of stainless steel of grades A2 and A4 respectively. |
|
ETA 18/0698 - Anclaje F-MTP Anclaje F-MTP-G Anclaje F-MTP-XThe Faynot F-MTP expansion anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel. The Faynot F-MTP-G expansion anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of sherardized steel. The Index F-MTP-X expansion anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of galvanized steel. |
|
ETA 18/0686 - Würth Anchor nail W-ANThe Würth Anchor nail W-AN in diameter 6 is an anchor made of galvanized steel. The anchor is installed into a predrilled cylindrical hole and anchored by deformation-controlled expansion. |
|
ETA 06/0263 - IMPERMAXAre liquid applied roof waterproofing membranes based on pure polyurethane, manufactured by the company KRYPTON CHEMICAL, S.L.
|
|
ETA 18/0609 - Anclaje hembra BSK TRSO / TRSOKThe BSK TRSO / TRSOK in the range of M6 to M20 is an anchor made of galvanised steel.
|
|
ETA 18/0612 - Anclaje de techo GSOAnchor made of galvanized steel for multiple use for non-structural applications in concrete.
|
|
ETA 12/0408 - Sistema GECOL TERM (SATE/ETICS)®Is a bonded system with supplementary mechanical fixings with EPS panel and mechanically fixed ETICS with supplementary adhesive on MW panel,
|
|
ETA 17/0709 - DOBLE COMPONENTE AUTOMÁTICO 1:1Is a cold plastic used as a surface coating material for signalisation purposes when it is applied on the road, requiring drop-on materials. |
|
ETA 17/0710 - TERMOPLÁSTICO EXTRUSIÓN BLANCOIs a road marking thermoplastic used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials.
|
|
ETA 16/0243 - PINTURA ACRÍLICA BLANCAIs a road marking paint used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials, painted without premix glass beads, applied by spray with drop-on material.
|
|
ETA 18/0107 - F-3301 Plástico en frío 98:2 estructurado blancoIs a cold plastic used as a surface coating material for signalisation purposes when it is applied on the road, requiring drop-on materials.
|
|
ETA 10/0444 - F-3201 A/B Plástico en frío «spray» blanco especial (CE)Is a cold plastic used as a surface coating material for signalisation purposes when it is applied on the road, not requiring drop-on materials. Cold plastic without premix glass beads, applied by spray with drop-on materials.
|
|
ETA 15/0911 - ANCLAJE MMA-II-SZ, MMA-II-A2, MMA-II-A4The UIP wedge anchor MMA-II-SZ in the range of M6, M8, M10, M12, M14, M16 and M20 is an anchor made of galvanised steel. The UIP wedge anchor MMA-II-A2 and MMA-II-A4 in the range of M6, M8, M10, M12, M16 and M20 are anchors made of stainless steel of grades A2 and A4 respectively.
|
|
ETA 16/0666 - UIP wedge anchor MMA-III-SZ, MMA-III-DZ, MMA-III-SZ2The UIP MMA-III-DZ wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of sherardized steel. The UIP MMA-III-SZ wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel. The UIP MMA-III-SZ2 wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of galvanized steel.
|
|
ETA 05/0242- Anclaje MTH. Anclaje MTH-A2. Anclaje MTH-A4Torque controlled expansion anchor made of galvanised steel or stainless steel of sizes M6, M8, M10, M12, M14, M16 and M20 for use in non-cracked concrete.
|
|
ETA 18/0018 - Anclajes camisa CH y CH2Torque controlled expansión anchor made of galvanised steel and stainless steel of diameters 8, 10,12,16 and 20 for use in non-cracked concrete.
|
|
ETA 16/0667 - Anclaje UIP FHD-VII-SZThe UIP hollow ceiling anchors FHD-VII-SZ are made of a metal sleeve and a metal expansion cone. By screwing in a metal normal metric screw with necessary length, not delivered with the product, the expansion cone is pulled into the sleeve.
|
|
ETA 18/0195- TOX ceiling anchor TopThe TOX ceiling anchor Top in diameter 6 is an anchor made of galvanized steel. The anchor is installed into a predrilled cylindrical hole and anchored by deformation-controlled expansion.
|
|
ETA 13/0347 - TERMOKLINKER®The veture kit “TERMOKLINKER” comprises prefabricated panels, profiles (if necessary), mechanical fixings and ancillary items.
|
|
ETA 07/0227 - F-2003. Termospray blanco 30% (CE)F-2003 is a road marking thermoplastic used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials.
|
|
ETA 07/0226 - F-3001R. Plástico en frío «manual» blanco rugoso (CE)F-3001R is a cold plastic used as a surface coating material for signalisation purposes when it is applied on the road, not requiring drop-on materials. |
|
ETA 07/0225 - F-1205 Pintura acrílica modificada blanca (CE)F-1205 is a road marking paint used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials. |
|
ETA 07/0224 - F-2203. Termoplástico «relieves» blanco 30% (CE)F-2203 is a road marking thermoplastic used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials. |
|
ETA 10/0242 - SPRAYLINE 45 Cod. TP-502SPRAYLINE 45 COD. TP-502 is a road marking thermoplastic used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials. |
|
ETA13/1014 - Anclaje BZ, BZ-G y BZ-XThe KEW BZ wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel. The KEW BZ-G wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of sherardized steel. |
|
ETA 06/0089 - COTETERMThe External Thermal Insulation Composite System “COTETERM” (ETICS) is a bonded system with supplementary mechanical fixings with EPS and XPS panel and mechanically fixed ETICS with supplementary adhesive on MW panel.
|
|
ETA 17/0509 - IMPERMAX COLD POLYUREAIt consists of a polyurethane-polyurea resins, bi-component, elastomeric with or without internal protection layer; which once polymerised conforms an elastic lining
|
|
ETA 17/0830 - Anchor S-Fix Plus / Slim Fix Anchor S-Fix Plus A2 Anchor S-Fix Plus A4Torque controlled expansion anchor made of galvanised steel or stainless steel of sizes M6, M8, M10, M12, M14, M16 and M20 for use in non-cracked concrete.
|
|
ETA 17/0829 - Anclaje S-Fix Pro W, S-Fix Pro WF y S-Fix ProThe TOX S-Fix Pro W wedge anchor in the range of M8, M10, M12, M16, M20 and M24 is an anchor made of galvanised steel.The TOX S-Fix Pro WF wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of sherardized steel. The TOX S-Fix Pro wedge anchor in the range of M8, M10, M12, M16 and M20 is an anchor made of galvanized steel.
|
|
ETA 12/0097 - Anclaje FIXBOLT Tuerca antigiroLUSAN FIXBOLT metric anchors M6 to M16 are anchors made of galvanized steel. They are intended to be inserted into a drill and fixed by means of a controlled expansion for tightening torque. |
|
ETA 07/0231 - SPRAYLINE B (TP-0500)SPRAYLINE B (TP-0500) is a white thermoplastic with premix glass microspheres and dropped-on materials. |
|
ETA 17/0143 - BELLATRIX SPRAY ABBELLATRIX SPRAY AB is a cold plastic without premix glass microspheres that requires the use of dropped-on materials to be used on roads exposed to traffic.
|
|
ETA 17/0145 - POLLUXPOLLUX is a solvent-based acrylic paint that requires the use of dropped-on materials to be used on roads exposed to traffic.
|
|
ETA 17/0142 - BELLATRIX URBANIs a cold plastic without premix glass microspheres that does not require the use of dropped-on materials to be used on roads exposed to traffic.
|
|
ETA 07/0230 - VIALINE SU-B (SU-0200)VIALINE SU B (SU-0200) is a white alkyd paint without premix glass microspheres that requires the use of dropped-on materials to be used on roads exposed to traffic.
|
|
ETA 17/0401 - DANOCOATDANOCOAT is a liquid applied roof waterproofing system based on 100 % Pure Polyurea.
|
|
ETA 17/0953 - MAXELASTIC POLYMAXELASTIC POLY is a liquid applied waterproofing system for bridge decks based on 100% Polyurea.
|
|
ETA 16/0675 - HYPERDESMO 300HYPERDESMO 300 is a liquid bridge deck applied roof waterproofing based on polyurethane.
|
|
ETA 17/0892 - DRACO GARDDRACO GARD consists of a polyuretane resins, mono-component, elastomeric without reinforcing mesh internal layer; which once polymerised conforms an elastic lining
|
|
ETA 16/0680 - TECNOCOAT P-2049TECNOCOAT P-2049 is a liquid bridge deck applied roof waterproofing based on 100% polyurea.
|
|
ETA 13/0605 - Anclaje Cloverfix MTP - Anclaje Cloverfix MTP-G - Anclaje Cloverfix MTP-XControlled expansion anchor made of galvanized or sherardized steel of metric M8, M10, M12, M16, M20 and M24 for use in cracked and uncracked concrete.
|
|
ETA 15/0258 - SEALPROOF EVO-MEMB PUSEALPROOF EVO-MEMB PU is a non-reinforced, elastomeric, single-component, polyurethane-based liquid waterproofing agent (only in singular points: drains, through elements, etc ..).
|
|
ETA 17/0229 - TERMOPLÁSTICO VISEVER RRIs a thermoplastic for road marking, with pre-mixed microspheres applied by spraying with dropped-oned glass microspheres.
|
|
ETA 17/0593 - CYMAELASTIC H500Is a one component liquid applied roof waterproofing based on water dispersible polymers, consists of a water dispersible styrene - acrilyc copolymers, elastomeric with an internal reinforcing mesh; which once polymerized conforms an elastic lining.
|
|
ETA 17/0481 - Through bolt SITA Acciaio CE1 TTSKS: S1KS, SI1KS, SH1KSThe anchor is installed in a cylindrical pre-hole and is fixed by controlled torque expansion. |
|
ETA 15/0155 - Sistema SATEFFICIs a cold plastic for horizontal road marking that is used as a surface coating material for signalization purposes when it is applied on the road with or without premix and/or dropped-on materials.
|
|
ETA 17/0486 - Wedge Anchor WA-G1 Galv Wedge Anchor WA-Z1 Zinc Plated – Galv Clip Wedge Anchor WA-ZS1 Zinc Plated – S/S ClipControlled Expansion Anchors made of galvanized or sherardized steel in metric M8, M10, M12, M16, M20 and M24 for use in cracked and uncracked concrete.
|
|
ETA 17/0487 - Wedge Anchor WA-S7 316 A4 S/SWEDGE ANCHOR WA-S7 316 A4 S / S is an anchor made of stainless steel. The anchor is installed in a pre-drilled circular hole fixed by controlled expansion.
|
|
ETA 06/0060 - POLITABER-FM MONOCAPAPOLITABER-FM MONOCAPA is single-ply flexible (SBS (Styrene-butadiene-styrene) modified bitumen) waterproofing roof Kit fastened mechanically with metallic point fasteners to deck structures, with a slope exceeding 1%.. . |
|
ETA 10/0248 - Marcaline 1:1 Componentes A and B Cod DCA-0492Marcaline 1:1 Components A and B Cod DCA-0492 is a cold plastic for horizontal road marking that is used as a coating to be applied on the road with dropped-on materials.
|
|
ETA 10/0247 - VIALINE AC-3B; Cod AC-0121VIALINE AC-3B; Cod AC-0121 is a road marking paint that is used as a coating to apply on the road with dropped-on materials.
|
|
ETA 15/0015 - Sistema ISOLXTREMIs an external thermal insulation system adhered to the support by means of an adhesive and complemented with mechanical fixings en case of use with Expanded Polystyrene (EPS) panels.
|
|
ETA 17/0150 - F-1201 Pintura acrílica modificada blanca "Repintados"White modified acrylic paint "Repainted" is an horizontal road marking paint that is used as a coating to apply on the road with dropped-on materials to build a road marking.
|
|
ETA 17/0149 - F-1301 Pintura acrílica modificada "sin disolventes aromáticos" blancaWhite "aromatic solvent-free" modified acrylic paint F-1301 is an horizontal road marking paint that is used as a coating to apply on the road with dropped-on materials.
|
|
ETA 17/0148 - F-2002 Termospray Blanco 20%F-2002 White Thermospray 20% is a thermoplastic for horizontal road marking that is used as a coating to be applied on the road with dropped-oned materials in order to do a road marking.
|
|
ETA 17/0147 - F-2202 Termoplástico "para relieves" blanco 20%F-2202 White "relief" thermoplastic 20% is a thermoplastic for horizontal road marking that is used as a coating to be applied on the road with dropped-oned materials in order to build a road marking.
|
|
ETA 17/0146 - F-4103 Pintura acrílica acuosa blanca básicaF-4103 Basic White Aqueous Acrylic Paint-4103 is a road marking paint that is used as a coating to be applied to the road with dropped-on materials to do a road marking.
|
|
ETA 16/0351 - CUPACLAD® 201 VANGUARD kit for the exterior cladding of facades is made up of natural slate plates |
|
ETA 17/0080 - AQUAPROTECT SILICONA MS LÍQUIDAIs a single-component liquid applied roof waterproofing based on hybrid silane modified polymer elastomeric hybrid polymer with an internal reinforcing frame.
|
|
ETA 17/0152 - IGNIFLAMEX INTUMESCENTE AL AGUAThe product is a reactive coating in water dispersion formulated for the fire protection of structural steel elements.
|
|
ETA 10/0448- Tezno T.4 GRANDES LUCESTezno T.4 GRANDES LUCES is a system for use as sheathing in roofs with composite lightweight panels.
|
|
ETA 17/0074 - HFKC (anclaje de acero cincado) - HFKP (anclaje de acero inoxidable)HFKC (galvanised wedge anchor) - HFKP (stainless steel wedge anchor), both anchors placed into a drilled hole and anchored by torque-controlled expansion.
|
|
ETA 08/0212 - MEPIMMEPIM consists of a polyurethane resins, mono-component, elastomeric without reinforcing mesh (only in singular point: evacuations, upstands, etc.) internal layer; which once polymerised conforms an elastic lining.
|
|
ETA 06/0062 - ESTERDAN PLUS FM BICAPAIs a multi-layer flexible bitumen modified with SBS (styrene-butadiene-styrene) and APP (Polypropylene Atactic) waterproofing roof kit fastened mechanically, with a slope exceeding 1%.
|
|
ETA 06/0058 - POLYDAN PLUS FMIs a single-ply flexible (SBS) waterproofing roof kit fastened mechanically with metallic point fasteners in area of overlapping at edge of roofing with a slope exceeding 1%.
|
|
ETA 16/0906 - COOL-RIs a component liquid applied roof waterproofing based on water dispersible polymers elastomeric with an internal reinforcing mesh
|
|
ETA 10/0054 - DANOPOL HS FMIs a single reinforced flexible practised Polyvinyl Chloride (PVC) waterproofing roof kit fastened mechanically, with a slope exceeding 1%.
|
|
ETA 11/0087 - ENCOSANPLA, ENCOSANFRIis a system for use as sheathing in roofs with composite lightweight panels.
|
|
ETA 16/0937 - Sistema BIGMATHERMis a bonded system with supplementary mechanical fixing with EPS/EPS-G panel and mechanically fixed ETICS with supplementary adhesive on MW panel.
|
|
ETA 16/0804 - TERMOPLÁSTICO EXTRUDER 30Is a road marking thermoplastic (as defined in EN 1872) used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials.
|
|
ETA 16/0805 - TERMOPLÁSTICO SPRAY 30Is a road marking thermoplastic (as defined in EN 1872) used as a surface coating material for signalisation purposes when it is applied on the road requiring dropped-on materials.
|
|
ETA 16/0669 - Statheros TRZ Statheros TRZ-G Statheros TRZ-XThe Statheros TRZ through bolt is an anchor made of zinc plated steel with stainless steel clip.The Statheros TRZ-G through bolt is an anchor made of sherardized steel with stainless steel clip. The Statheros TRZ-X through bolt is an anchor made of zinc plated steel with sherardized steel clip.
|
|
ETA 14/0143 - ACE PU-100The system consists of a two component liquid cured waterproofing membrane based on reaction of isocyanate and amines, with or without pigment.
|
|
ETA 16/0672 - Borgh BDA 01 Borgh BDA 01-Th Borgh BDA 01-XThe Borgh BDA 01 through bolt is an anchor made of zinc plated steel with stainless steel clip. The Borgh BDA 01-Th through bolt is an anchor made of sherardized steel with stainless steel clip. The Borgh BDA 01-X through bolt is an anchor made of zinc plated steel with sherardized steel clip.
|
|
ETA 16/0504 - TP CHCThe Team Pro TP CHC anchors are made of a metal sleeve and a metal expansion cone.
|
|
ETA 16/0501 - SOLVTEC S-DAP/S-DALAnchor in the range of M6 to M20 is an anchor made of galvanised steel. Which is placed into a drilled hole and anchored by deformation-controlled expansion.
|
|
ETA 16/0500 - SOLVTEC S-CCA/S-CCA-H/S-CCA-HCThe SOLVTEC S-DAP/S-DAL anchor in the range of M6 to M20 is an anchor made of galvanised steel. |
|
ETA 16/0499 - Solvtec S-UCA, Solvtec S-UCA-SThe SOLVTEC S-UCA anchor in the range of M6 to M20 is an anchor made of galvanized steel. |
|
ETA 09/0099 - TRIPOMANTThe reflective product TRIPOMANT is composed of one/two external aluminum films (min. 98.5% of purity) of low emissivity (< 0.06), linked by a thermo-welded to one/several internal layer of polyethylene and propylene-aluminum. |
|
ETA 16/0659 - BETOPURBETOPUR consists of a polyurethane resins, mono-component, elastomeric without reinforcing mesh (only in singular point: evacuations, upstands, etc.) |
|
ETA 16/0503 - Borgh slaganker. Borgh slaganker met kraagThe Borgh slaganker/slaganker met kraag is an anchor in the range of M6 to M20 is an anchor made of galvanised steel. |
|
ETA 16/0498 - Ter Laare BX FAST ETA 1The Ter Laare BX FAST ETA 1 concrete screw is an anchor made of carbon steel.
|
|
ETA 16/0497 - UIP Concrete Screw CSG-IIIThe UIP Concrete Screw CSG-III is an anchor made of carbon steel. |
|
ETA 15/0017 - Anclaje fijación directa en hormigón Index THDEXThe Index THDEX is an anchor made of carbon steel. |
|
ETA 16/0502 - (ICFS) INDO WEDGE ANCHOR IWA (ICFS) INDO WEDGE ANCHOR IWA-A4The (ICFS) Indo wedge anchor IWA anchor in the range of M6 to M20 is an anchor made of galvanised steel. |
|
ETA 16/0148 - POLYUREA RAYSTONPOLYUREA RAYSTON is a liquid applied roof waterproofing membrane based on a pure resin of pure polyurea, manufactured by the company KRYPTON CHEMICAL, S.L.
|
|
ETA 16/0640 - Sistema APLICA THERMIs intended to be used as external thermal insulation for building walls. The walls are made of masonry (bricks, blocks, etc.), or concrete (cast on site or as prefabricated panels) with a reaction to fire classification A1 to A2-s2,d0 according to EN 13501-1 or A1 according to the EC decision 96/603/EC as amended. |
|
ETA 16/0639 - Sistema CAPA THERMThe Sistema CAPA THERM is intended to be used as external thermal insulation for building walls. |
|
ETA 09/0154 - CALIPLACIs made of non-metallic covering layers and extruded polystyrene thermal insulating core XPS of different thicknesses bonded by means of polyurethane glue.
|
|
ETA 10-0447 - Tezno T.1, Tezno T.2, Tezno T.3 y Tezno T.5Is made of non-metallic covering layers and extruded polystyrene thermal insulating core XPS of different thicknesses bonded by means of polyurethane glue. |
|
ETA 16/0422 - TAURUS TOPTAURUS TOP consists of a polyurethane resins, mono-component, elastomeric without reinforcing mesh (only in singular point: evacuations, upstands, etc.). |
|
ETA 15/0146 - CHARFLAMEThe CHARFLAME product is reactive coating in water dispersion formulated for the fire protection of structural steel elements. |
|
ETA 10/0445 - PANFRI, PANPLA, SANFRI, SANPLAThe following self-supporting composite lightweight panels “PAN-FRI”, “PAN-PLA”, “SAN-FRI”, “SAN-PLA” present different thicknesses, and consists of basis, rafters, an insulation injected polyurethane foam core.
|
|
ETA 15/0912 - Anclaje HCThe Index HC Anchor is made of a metal sleeve and a metal expansion cone. By screwing in a metal normal metric screw with necessary length, not delivered with the product, the expansion cone is pulled into the sleeve.
|
|
ETA 08/0169 - Anclaje AWA. Anclaje AWA SS-A4The AWA in the range of M6 to M20 is an anchor made of zinc plated steel. The AWA SS-A4 in the range of M6 to M20 is and anchor made of stainless steel. Both are placed into a drilled hole and anchored by torque-controlled expansion |
|
ETA 11/0016 - HYPERDESMO-POLYUREA-2K HCIs a liquid membrane based on polyurea resins for application with plural dispensing equipment. |
|
ETA 16/0129 - Sistema BEYEM-JAFEPIs a bonded system with supplementary mechanical fixings with EPS/XPS panel and mechanically fixed ETICS with supplementary adhesive on MW panel.
|
|
ETA 16/0255 - MONTÓTHERM® Lana Mineral MWThe External Thermal Insulation Composite System (ETICS) “MONTOTHERM® MW” is a mechanically fixed ETICS with supplementary adhesive with a minimum number of fasteners per square metres is 6. |
|
ETA 07/0062 - TQ IMPER POLThe Liquid Applied Roof Waterproofing Kit (LARWK) “TQ IMPER POL” is a liquid applied roof waterproofing based on pure polyurethane, consists of a polyurethane resins, mono-component, elastomeric with or without internal protection layer; which once polymerised conforms an elastic lining, in form of a layer completely bonded to different supports (steel and other types of metals, concrete, mortar, ceramic, polyurethane foam (PU) and other waterproofing membranes like PVC, EPDM and bituminous).
|
|
ETA 11/0062 - IMPERMAX POLYUREA HA liquid applied roof waterproofing kit based on polyuria. It is constituted by polyuria resins, is bi-component and elastomeric, without internal protection layer.
|
|
ETA 16/0098 - TMU. TMUA4TMU is a torque controlled expansion anchor made of galvanized steel of the sizes in the range from M6 to M20 and can only be used in non-cracked concrete subject to dry internal conditions. |
|
ETA 15/0864 - PERMAFLEX ULTRAA liquid applied roof waterproofing kit based on polyurethane. |
|
ETA 15/0916 - FRONTEK PLUS y FRONTEK OMEGA PLUSKits for ventilated external wall claddings that consist of an external cladding based on ceramic plates, mechanically fastened to a substructure, which is fixed to the external wall of new or existing buildings. |
|
ETA13/0308 - HB MA CE GV HB MA CE A4The Halfen HB MA CE GV in the range of M6 to M20 is an anchor made of galvanised steel. |
|
ETAA mono-component liquid applied roof waterproofing kit based on water dispersiable polymers. |
|
ETA 10/0343 - ELASTICO LP-70A mono-component liquid applied roof waterproofing kit based on water dispersiable polymers. |
|
ETA 10/0342 - ALP ELASTA mono-component liquid applied roof waterproofing kit based on water dispersiable polymers. |
|
ETA 10/0096 - REVETON CUBIERTASA mono-component liquid applied roof waterproofing kit based on water dispersiable polymers. |
|
ETA 15/0596 - IMPERLUX POLA mono-component liquid applied roof waterproofing kit based on polyurethane. |
|
ETA 15/0721 - BLATEM ELASTEMA mono-component liquid applied roof waterproofing kit based on water dispersiable polymers. |
|
ETA 15/0510 - SIKALASTIC 840A bi-component liquid applied roof waterproofing kit based on pure polyurea. |
|
ETA 14/0254 - Anclaje FPU-CE1 Anclaje HG-FPU-CE1Unifix FPU-CE1 is a torque-controlled expansion anchor made of zinc plated steel of the sizes in the range from M8 to M20 and may only be used in cracked or non-cracked concrete subject to dry internal conditions. |
|
ETA 15/0229 - WX7-Z WX7-A4Is a torque-controlled expansion anchor made of galvanized steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions. |
|
ETA 15/0222 - Borgh BSQ DOORSTEKANKER Borgh BSQ-A4 DOORSTEKANKERBorgh BSQ is a torque controlled expansion anchor made of galvanized steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions. |
|
ETA 11/0357 - TECNOCOAT P-2049A bi-component liquid applied roof waterproofing kit based on pure polyurea. |
|
ETA 11/0475 - Anclaje TP NCA Anclaje TP NCA-A4Team Pro TP NCA is a torque-controlled expansion anchor made of galvanized steel of the sizes in the range from M8 to M20 and may only be used in non-cracked concrete subject to dry internal conditions. |
|
ETA 15/0190 - LOTUMROOF POLYPUR 150A mono-component liquid applied roof waterproofing kit based on pure polyurethane. |
|
ETA 15/0191 - ATERKI-POLA mono-component liquid applied roof waterproofing kit based on pure polyurethane. |
|
ETA 14/0226 - VERMIPLASTER® BD MP 75 SL FIREA rendering intended for fire resisting application of building elements. It is a mortar of fine granule based in calcium sulphate, lightened with expansive minerals and formulated with several additives to improve the application and its performances. |
|
ETA 15/0168 - Anclaje Kraftool MTP Anclaje Kraftool MTP-GKraftool MTP is a torque-controlled expansion anchor made of zinc plated steel of the sizes in the range from M8 to M20 and may only be used in cracked or non-cracked concrete subject to dry internal conditions. |
|
ETA 15/0046 - Anclaje hembra Team Pro TP DA / TP DALTeam Pro TP DA and Team Pro TP DAL are deformation controlled anchors made of galvanized steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions for multiple use for non-structural applications in concrete. |
|
ETA 15/0111- MAXELASTIC POLYA bi-component liquid applied roof waterproofing kit based on pure polyurea. It consists of pure polyuria resins, is elastomeric and has no internal protection layer. |
|
ETA 15/0049 - Sistema EUROTHERMAn external thermal insulation composite system bonded trough adhesive with supplementary mechanical fixings in case of use of EPS panels or with supplementary adhesive in case of use of MW panels.
|
|
ETA 04/0097 - TEIMLAMA liquid applied roof waterproofing kit based on epoxy resin. It is manufactured under the concept of continue system and is a multi-layers type, which is obtained by mean of impregnation “in situ” of fibre glass sheets with liquid epoxy resin. |
|
ETA 04/0082 - HYPERDESMOA mono-component liquid applied roof waterproofing kit based on polyurethane. It consists of polyurethane resins, is elastomeric and has no reinforcing mesh internal layer (only needed in singular points; evacuations, upstands…). |
|
ETE 09/0005 - Sistema AISTERMAn external thermal insulation composite system bonded trough adhesive with supplementary mechanical fixings in case of use of EPS or XPS panels or with supplementary adhesive in case of use of MW panels. |
|
ETA 14/0431 - Anclaje TM C7 Anclaje TM C7-A4TM C7 is a torque-controlled expansion anchor made of galvanized steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions. |
|
ETE 04/0100 - Anclaje grandes cargas INDEX SLVTis an anchor-controlled expansion anchor made of galvanized steel of the sizes in the range from M8 to M24 and may only be used in non-cracked concrete subject to dry internal conditions. |
|
ETA 14/0430 - AQUAPRO® PY 01A bi-component liquid applied roof waterproofing kit based on pure polyurea. It consists of pure polyuria resins, is elastomeric and has no internal protection layer. |
|
ETA 14/0371 - Sistema MONOTEK-TERMIs a bonded system with supplementary mechanical fixings with EPS panel and mechanically fixed.
|
|
ETA 14/0397 - ATERKI-COATA bi-component liquid applied roof waterproofing kit based on pure polyurea. It consists of pure polyuria resins, is elastomeric and has no internal protection layer. |
|
ETA 13/0148 - SpECFix MTH SpECFix MTHA4Is a torque-controlled expansion anchor made of zinc plated steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions. |
|
ETA 12/0286 - Anclaje KRAFTOOL MTH Anclaje KRAFTOOL MTH-A4Is a torque controlled expansion anchor made of zinc plated galvanized steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions.
|
|
ETA 11/0378 - Anclaje MaxxFast THRUMAXX Anclaje MaxxFast THRUMAXX A4A torque-controlled expansion anchor made of zinc plated galvanized steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions.
|
|
ETA 11/0366 - Anclaje PSRe Anclaje PSRe-A4PSRe is a torque-controlled expansion anchor made of zinc plated galvanized steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions. |
|
ETA 13/1013 - Anclaje KEW BN Anclaje KEW BN-A4Is a torque-controlled expansion anchor made of zinc plated galvanized steel of the sizes in the range from M6 to M20 and may only be used in non-cracked concrete subject to dry internal conditions. |
|
ETA13/0509 - Anclaje KBA Anclaje KBA-HThe Kalz KBA through bolt is an anchor made of zinc plated steel. |
|
