esen
esen

ETA 23/0805
IMPERTHANE MEMBRANA PU

The Liquid Applied Roof Waterproofing Kit (LARWK) “IMPERTHANE MEMBRANA PU” is designed and installed in accordance with the manufacturer, design and installation instructions, deposited at the IETcc. This LARWK comprises the following components, which are factory produced by the manufacturer or a supplier.

Components Trade name Consumption
Primer WOLLMON E 100 (epoxy) 0.3 – 0,5 kg/m2
WOLLMON EW 105(epoxy primer in water dispersion) 0,3 – 0,5 kg/m2
WOLLTHANE PU FLEX PRIMER 0,15 – 0,25 kg/m2
WOLLTHANE PU PRIMER 100 0,15 – 0,25 kg/m2
Internal reinforcement TEJIDO GEOTEXTIL POLIÉSTER (Geotextil non-woven)

FIBRA MAT (Glass fibre mat)

——
Waterproofing membranes IMPERTHANE MEMBRANA PU ≥ 1,6 kg/m2
IMPERTHANE MEMBRANA PU TIXOTRÓPICO. Alternative version to I IMPERTHANE MEMBRANA PU , it has the same formulation however, with a thixotropy adjustment (< 3%) added after manufacturing and prior to delivery that lets the resin to be applied over sloped surfaces.
IMPERTHANE MEMBRANA PU + WOLLTHANE AC 1C FLEX.

IMPERTHANE MEMBRANA PU  TIXOTRÓPICO + WOLLTHANE AC 1C FLEX

≥ 2,2 kg/m2
Working life  Minimum quantity consumed Minimum thickness (mm)
10 IMPERTHANE MEMBRANA PU

IMPERTHANE MEMBRANA PU TIXOTRÓPICO

1,6 kg/m2

1,4
25 IMPERTHANE MEMBRANA PU

IMPERTHANE MEMBRANA PU TIXOTRÓPICO

2 kg/m2

1,6
IMPERTHANE MEMBRANA PU

IMPERTHANE MEMBRANA PU TIXOTRÓPICO

2 kg/m2 + FIBRA MAT

 

IMPERTHANE MEMBRANA PU

IMPERTHANE MEMBRANA PU TIXOTRÓPICO

1,5 kg/m2 + FIBRA MAT + WOLLTHANE AC 1C FLEX (0,7 kg/m2)

1,8
25 IMPERTHANE MEMBRANA PU

IMPERTHANE MEMBRANA PU TIXOTRÓPICO

3 kg/m2 + TEJIDO GEOTEXTIL POLIÉSTER

2,2

This kit can be used for different working life depending mainly of this thickness:

IMPERTHANE MEMBRANA PU is a liquid applied roof waterproofing kits based on pure polyurethane. It consists of a polyurethane resin, liquid-applied, mono-component, elastomeric with or without internal protection layer. IMPERTHANE MEMBRANA PU / IMPERTHANE MEMBRANA PU TIXOTRÓPICO reacts with the environmental humidity (direct reaction). WOLLTHANE AC 1C FLEX is moisture triggered cured (indirect reaction).

Once polymerised they conform an elastic lining, in form of a layer completely bonded to different supports (steel and other types of metals, concrete, mortar, ceramic, timber, polyurethane foam and other waterproofing membranes like PVC, EPDM and bituminous). Depending on support condition, other type of primer may be advisable.

DETAILS

Group:

(3) ROOFS

Area:

(3) 3. Waterproofing membranes, liquid applied waterproofing roof kits

Subarea:

N/D.

Product / System name:

IMPERTHANE MEMBRANA PU

Approval or assessment holder:

EUROTEX TCH

Valid from:

2023