ETA 22/0380
MAXELASTIC POLY-H
The Liquid Applied Roof Waterproofing Kit (LARWK) “MAXELASTIC POLY-H” is designed and installed in accordance with the manufacturer, design and installation instructions, deposited at the IETcc. This LARWK comprises the following components, which are factory produced by the manufacturer.
Components | Trade name | Consume |
Primer over concrete | MAXURETHANE PRIMER
polyurethane based |
≥ 0.200 kg/m2 |
Primer over concrete and thermal insulation | MAXEPOX PRIMER W
epoxy water based |
≥ 0.200 kg/m2 |
Primer on metal | MAXEPOX -AC, epoxy | ≥ 0.150 kg/m2 |
Waterproofing membrane | MAXELASTIC POLY-H | ≥ 1.5 kg/m2. |
Finish layer: Protection UV | MAXURETHANE 2C | ≥ 0.250 kg/m2 |
MAXURETHANE -W | ≥ 0.100 kg/m2 | |
Film Slipperiness | MAXFLOOR ANTISLIP | 8 % weight mixed
MAXURETHANE 2C or MAXURETHANE-W |
MAXFLOOR ANTISLIP-G | 8 % weight mixed
MAXURETHANE 2C or MAXURETHANE-W |
MAXELASTIC POLY-H is a two components liquid applied roof waterproofing based on applied hybrid polyurea, consists of a hybrid polyurea resins, two components, elastomeric without reinforcing internal layer; which once polymerized conforms an elastic lining, in form of a layer completely bonded to the support (steel, concrete, mortar, ceramic, XPS) and other waterproofing membranes like PVC, EPDM and bituminous. The minimum layer thickness of the assembled membrane has to be 1,4 mm.
DETAILS
Group:
Area:
Subarea:
Product / System name:
Approval or assessment holder:
Valid from: