esen
esen

ETA 20/1265
TRESPA® METEON®

TRESPA® METEON® y TRESPA® METEON® FR kits, for ventilated external wall claddings, are composed by high-pressure decorative laminates for exterior application produced by TRESPA INTERNATIONAL B.V. HPL panels are mechanically fixed to timber or aluminium subframe.

The fixing systems included in the ETA are:

  • TS150 – visible fixing with screws on timber subframe (family A);
  • TS700 – visible fixing with rivets on aluminium subframe (family A);
  • TS200 – invisible fixing with brackets on rails on aluminium subframe (family B);
  • TS300 – invisible fixing with horizontal rail and profiled edges on aluminium subframe (family C);
  • TS650 – invisible fixing with clips and profiled edges on timber subframe (family C);
  • TS600 – invisible fixing with clips and profiled edges on aluminium subframe (family C).

Families referred above are described in EAD 090062-00-0404:”Kit for external wall claddings mechanically fixed”, edition July 2018.

These kits can be fixed to the substrate wall of new or existing buildings. Usually on the substrate wall is also fixed the insulation material (defined in accordance with an EN standard or an ETA and is not manufactured by TRESPA INTERNATIONAL B.V.)

Kit for ventilated external wall claddings is non-load-bearing construction system. It does not contribute to the stability of the wall on which it is installed, neither to ensure the air tightness of the building structure but it can contribute to durability of the works by providing enhanced protection from the effect of weathering.

DETAILS

Group:

(1) FACADES

Area:

(1) 9. Curtain walls, facade claddings, structural sealant glazing

Subarea:

(1) 9.1 Ventilated facades

Product / System name:

TRESPA® METEON ®

Approval or assessment holder:

TRESPA INTERNACIONAL BV

Valid from:

2021